Instructions

1. Print a photo in a standard size, such as 8 x 10 inches.

 

2. Purchase a 1 x 10 board in the length needed. For example, if you are creating three 8- x 10-inch projects, choose a board that is at least 30 inches long. (We used a 1 x 10 x 4.)

 

3. On the board, mark each photo’s dimensions and how you want to cut the pieces.

Note: A 1 x 10 actually measures 9-1/4 inches wide, so you will need to rip it to 8 inches for 8- x 10-inch photos. Use a circular saw or a handsaw with miter box to cut the pieces.

 

4. Lightly mark the dimensions of the wood pieces on each photo. Using a utility knife, carefully trim each photo into corresponding pieces.

 

5. Attach a small picture hanger (#99644) to the back of each wood piece, centered near the top edge.

 

6. Use acid-free spray adhesive (#275900) to attach the photo pieces to the wood pieces, and then hang them on the wall.

Tools, products, materials, techniques, building codes and local regulations change; therefore, Lowe's assumes no liability for omissions, errors or the outcome of any project. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed professional if in doubt about any procedures. Please read our terms of use.