This multipurpose system can keep track of invitations, grocery lists and household notes.
Step-by-Step Instructions
Step 1: Determine how you will arrange the pre-made moulding-square frames on the wall and which ones will frame the cork tiles, chalkboard-paint area, dry-erase board and magnetic-paint area. Using a level and a pencil, mark the dimensions of each moulding-square frame on the wall in your desired arrangement.
Step 2: Spray-paint the moulding-square frames, and allow to dry.
Step 3: Following the manufacturer’s instructions, apply chalkboard paint within one marked outline on the wall, and apply magnetic primer within a second outlined section of the wall. Allow each coat to dry. Use utility scissors to cut the cork tiles to fit your chosen moulding-square frame, and attach the cork to the wall with the included adhesive. Use a circular saw with a straightedge guide to cut the dry-erase panel to fit your chosen frame, and attach the panel to the wall with heavy-duty construction adhesive.
Note: For tips on using a circular saw, visit LowesCreativeIdeas.com/SkillSet.
Step 4: Use a hammer and wire brads to hang the moulding-square frames around the cork, dry-erase panel and painted areas.
Good To Know
You can use electrical tape, which is available in a variety of colors, to divide the cork tiles into sections.
Tools, products, materials, techniques, building codes and local regulations change; therefore, Lowe's assumes no liability for omissions, errors or the outcome of any project. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed professional if in doubt about any procedures. Please read our terms of use.
