Lowe's Home Improvement
FREE PARCEL SHIPPING on Qualifying Orders

A fountain kit, a medium-size pot and a handful of rocks turn a small amount of water into a soothing bubbler.

 

Instructions

  1. Assemble the pump following manufacturer's direction.
  2. Use a stopper to block the drainage hole in the bottom of the planter.
  3. Cut out the center of the diffuser for the spout. Use a drill and hole saw bit slightly larger than the spout (we used a 1-1/2-inch hole saw bit).
  4. Place the plastic container inside the planter. Place the pump inside the plastic container. The pump cord will hang over the side.
  5. Slip the diffuser over the spout and surround with large beach pebbles.
  6. Add water, plug in and relax.

 

Refer to the diagram to complete assembly (linked at right side)

Tools, products, materials, techniques, building codes and local regulations change; therefore, Lowe's assumes no liability for omissions, errors or the outcome of any project. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed professional if in doubt about any procedures. Please read our terms of use.

Article Contents

Project Resources

  • Diagram
  • Skill Level: Beginner
  • Rough Cost Estimate: $97

Tools You'll Use

  • Drill
  • Hole saw bit

Lowe's List

  • Large planter (#29422)
  • Large beach pebbles (#3052)
  • 5 quart plastic container (#206701)
  • Diffuser (#70431)
  • Pump (#8417)