Hardwood Flooring Introduction
In addition to adding warmth and beauty to a room, hardwood floors are also a great way to increase the value of your home. There are many different styles of hardwood flooring to choose from, including domestic and exotic species, bamboo and cork.
You can buy prefinished hardwood floors that are already stained and finished with a coating that is stronger than most site-applied finishes. There are also coordinating mouldings that are stained and prefinished to coordinate with the floor you select. If you prefer to finish your new flooring on-site, unfinished flooring is an option.
Choosing the right flooring is as easy as 1, 2, 3. We make it easy to get the floor that's right for both you and your home. All you need to do is choose your construction, style, and installation method. It's that simple.
Hardwood Construction
Hardwood floors can be installed on any level of your home and are available in multiple constructions to allow for installation flexibility over different subfloors and to mitigate moisture. Identify your subfloor and level of your home to determine what construction of hardwood to install (see chart below).
It's important to take moisture into consideration when you're installing hardwood floors since changes in moisture can create issues such as warping and gapping. To mitigate the effects of moisture, keep moisture levels within manufacturer recommendations and choose the right construction of hardwood flooring and installation materials. For an added layer of protection against moisture damage, install a moisture barrier. It is not recommended that you install hardwood flooring in full baths to do fluctuating moisture conditions.
There are three primary subfloors over which you can install:
- Basement or concrete below ground level
- Concrete at ground level
- Plywood subfloor at or above ground level
There are four constructions of hardwood floors to address each primary type of subfloor.
- 3/4-in. Solid
- 5/16-in. Solid
- Engineered
- Locking
3/4-in. Solid
This is a 3/4-in. thick solid piece of hardwood floor and is what customers traditionally think of for hardwood floors. Because solid floors expand more when exposed to moisture than engineered floors, you can only install them over a plywood subfloor at or above ground level. If you have a crawl space, it's a good idea to put a moisture barrier underneath the crawl space to help control moisture coming through the ground into your home.
*Most solid floors can be sanded and refinished. Check manufacturer's warranty.
5/16-in. Solid
A thinner version of the 3/4-in. hardwood floor. Since it's solid, you cannot install it in the basement or on concrete below ground level, but it's thin enough to glue down to concrete at ground level or install over plywood at or above ground level. Urethane adhesives are required and moisture barriers are recommended for gluing down 5/16-in. solids.
*Most solid floors can be sanded and refinished. Check manufacturer's warranty.
Engineered Hardwood
Engineered floors are as much of a hardwood floor as a 3/4-in. solid floor. In fact, engineered floors were designed for installation over concrete and to help mitigate potential moisture issues. The cross-layer construction prevents the floor from expanding as much as a 3/4-in. or 5/16-in. solid floor when exposed to moisture. Therefore, you can install engineered anywhere in the home, including the basement. Engineered floors are also more environmentally friendly and less expensive than solid floors because the veneer is only a few millimeters thick instead of 3/4-in. thick. The real hardwood veneer of engineered floors differs from laminate, which has a printed paper veneer.
*Some engineered floors can also be sanded and refinished. Check manufacturer's warranty.
Locking Hardwood
A locking, or floating, floor is an engineered floor, but with the added advantage of a locking tongue and groove system. It's the perfect do-it-yourself flooring solution because nails, staples, and glue are not required. All you have to do is roll out the moisture barrier underlayment and lock the planks into place.
*Some locking floors can be sanded and refinished.
Hardwood Flooring Types, Hardness and Species
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
Hardwood floors are available in a wide selection that can match anyone's style. When considering a hardwood floor that is right for you, consider the following factors:
Species
There are domestic species like Oak, Maple, and Cherry as well as exotic species like Bamboo, Brazilian Cherry, and Cork. Each species has a distinct grain pattern. For example, Oak has a very distinguished grain whereas Maple is very subtle. Exotics are very popular because of their distinct grain patterns and color.
Different species also have varying degrees of hardness. Hardwood floors are a natural product and are susceptible to dents (not covered under manufacturer warranties unless specifically stated). If you expect your floors will take a lot of abuse, consider a species at least as hard as red oak based on the hardness chart to the right.
Color
Most domestic species of wood come in a variety of colors. Most exotic species, on the other hand, are not stained because their natural color is very popular. Many exotic species are photosensitive and need exposure to sunlight to achieve their desired rich color.
Width
Wider floors over 3 inches are gaining popularity. Widths can easily change the look of a floor since the wider the plank, the fewer the seams that can be seen in the floor. Wider widths also showcase the natural beauty of the wood, especially Hickory and Tigerwood.
Texture
There are many types of texture to choose from, including smooth, hand-scraped, distressed, and wirebrushed.
Choose Your Hardwood Construction
Here is a quick overview of the different ways to install hardwood flooring:
Locking
This is an excellent DIY product because nails, staples, and glue are not required. All you have to do is roll out the moisture barrier underlayment for moisture protection and then float the floor over the subfloor by locking the planks together.
Glue
Gluing involves troweling glue on the floor and setting the planks into the glue. Lowe's offers adhesive systems that incorporate a moisture barrier to help mitigate moisture-related issues.
Nail
Nailing involves driving a nail at an angle through the tongue of the hardwood floor into the wood subfloor. The nail is then hidden by the groove of the next row of boards.
Staple
This is simliar to the nailing process, but with staples.
Things to Consider
Defects
Make sure you know the defect rate of the wood you are buying. If the rate is over 50%, you will need to buy almost twice as much than a wood that is rated 95% defect free. Wood with high defect rates can also create issues with installation.
Grade
The wood's appearance determines its grade. All grades can be equally defect free, but each grade offers a distinct look. Clear and select grades are the cleanest looks with minimal knots and color variations. Millwood and cabin grades will allow all the characteristics of the species to show, shuch as knots, streaks, and color variations.
Tools, products, materials, techniques, building codes and local regulations change; therefore, Lowe's assumes no liability for omissions, errors or the outcome of any project. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed professional if in doubt about any procedures. Please read our terms of use.