ZIP code to see price.
Item #: 311386
Model #: DC4CKITA
Includes 18-volt 1/2-in compact drill/driver, 18-volt reciprocating saw, 18-volt 6-1/2-in circular saw, 18-volt pivoting head flashlight, 2 18-volt...
Compact drill/driver delivers 410 unit watts out (UWO) of maximum power
Circular saw can cut 2x4-ft at a 45° angle in a single pass for fast results
Item #: 93653
Model #: D25404K
8.3 amp motor provides high performance and overload protection
Hard-hitting hammer mechanism for fast and efficient penetration
Fully sealed gearbox is engineered for long-life by keeping grease in and dust out
Item #: 325140
Model #: 1530
Burr-free edges — no finishing
Full swivel die available — for cutting in all directions
Corrugated, trapezoidal or full square stock — all cut efficiently with a simple cutter change
Item #: 412394
Model #: CLPK221-181
Includes Brute Tough™ Li-ion hammer drill/driver, Li-ion hex impact fastening driver, two 18-volt FatPack high-capacity Li-ion batteries,...
Brute Tough™ 1/2" hammer drill/driver is compact and lightweight, delivering better balance and control while working in tight spaces; 4-pole...
1/4" hex impact fastening driver features a high-performance motor and all-metal gears that deliver 2,800 RPM/3,200 BPM; Bosch-engineered hammer and...
Item #: 23146
Model #: DCK440X
Includes XRP; ½-in hammer drill, 6-1/2-in circular saw, reciprocating saw, 18-volt pivoting head flashlight, 2 18-volt XRP; batteries, 1-hour...
18-volt XRP; cordless hammer drill features a patented 3-speed all-metal transmission and ½-in ratcheting chuck that delivers 420 units watts out of...
18-volt cordless reciprocating saw features a keyless blade clamp that allows for quick blade changes without touching blade or reciprocating shaft
Item #: 311352
Model #: DC310K
6-1/2" carbide-tipped blade cuts common materials at 90° and 45°
3,850 RPM allows for fast rip cuts and cross cuts
0-50° bevel capacity allows for aggressive bevel cuts in various applications
Item #: 373046
Model #: CET4-20W
Collapsible handle and 10-in pneumatic wheels make it easy to transport throughout the jobsite
Vertically-angled tanks enable better center of gravity for easy transport when carried
E-Z Drain has 1 ball-valve drain located in the control panel for simultaneous draining of both tanks
Item #: 353244
Model #: GTS1031
Ultimate portability - balanced 1-handed carry handle combined with a compact design and complete under-table storage of accessories
Durable and unique all-steel base design - lightweight base incorporates carry handle and stacks on side for transport and storage; all-steel design...
Squarelock™ rip fence - engineered for maximum trueness; fence glides along the rail at a finger's touch or locks into place for solid and...
Item #: 412232
Model #: 1773AK
Lock-on slide switch for extended-use applications
Double insulated, UL listed, complies to OSHA
Constant Response™ circuitry provides soft-start, maintains constant speed under load, provides overload protection
Item #: 522712
Model #: CLPK221-181
Includes Brute Tough hammer drill/driver, impact fastening driver, charger, 2 batteries and carrying bag
Brute Tough 1/2-in hammer drill/driver, with its compact and lightweight design, delivers a superior balance and control even when working in tight...
Brute Tough 1/2-in hammer drill/driver delivers a 4-pole high performance motor for maximum power in the most compact size
Item #: 1935
Model #: 11240
SDS-max® bit system for tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate
Combination dual mode selector — 2 modes of operation, rotary hammer and hammer only mode
Vario-Lock® positioning rotates and locks chisel into 12 different positions to optimize working angle
Item #: 557394
Model #: DCK420D2
Includes: DCD780 1/2-in drill/driver, DCF885 1/4-in impact driver, DCS381 reciprocating saw, DCL040 LED work light, (2) 20-volt max Li-ion 2.0 Ah...
DCD780 20-volt max 1/2-in drill/driver features 2-speed transmission (0-600/0-2000 RPM)
DCS381 20-volt max reciprocating saw, with keyless blade clamp, allows for quick blade change without touching blade or reciprocating shaft
Item #: 221857
Model #: DW734
Cuts per minute to 96 cuts per inch
3-knife cutter-head delivers 30% longer knife life
4-column carriage lock to reduce snipe
Item #: 380751
Model #: CAG180-01
Slim-housing, short length and lightweight design fits into tight spaces and reduces user fatigue
Powerful 4-pole motor design for heavy duty applications
Electronic Cell Protection (ECP) monitors battery to prevent damage in heavy duty applications
Item #: 92775
Model #: DC628K
Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
Sequential-operating mode allows for precision placement and the bump-operating mode provides the user with production speed
Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches
Item #: 203680
Model #: D55168
Includes 15 gallon workshop compressor
5.0 SCFM at 90 PSI allows for quick compressor recovery times
15-gal. ASME steel tank is durable
We price our carpet in two ways:
- "Per Square Foot" is our unit price which measures the area of a flat surface, e.g., 3 ft. long x 3 ft. wide = 9 sq. ft.
- "Per Linear Foot" measures the length of a single roll of carpet, e.g., a linear foot of a 10 ft. wide roll of carpet = 1 ft. x 10 ft. = 10 sq. ft.