ZIP code to see price.
Item #: 311386
Model #: DC4CKITA
Includes 18-volt 1/2-in compact drill/driver, 18-volt reciprocating saw, 18-volt 6-1/2-in circular saw, 18-volt pivoting head flashlight, 2 18-volt...
Compact drill/driver delivers 410 unit watts out (UWO) of maximum power
Circular saw can cut 2x4-ft at a 45° angle in a single pass for fast results
Item #: 637405
Model #: DCN692B
Brushless motor and engine design allow the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
Sequential operating mode allows for precision placement, and the bump operating mode provides the user with production speed
2-speed selector switch optimizes speed for fastener lengths
Item #: 673729
Model #: DWS709
DWS709 miter saw, carbide blade, and dust bag
Powerful 15-amp, 3,800 RPM motor delivers extended power and durability
Tall sliding fences support crown molding up to 5-1/2-in nested and base molding up to 4-1/2-in vertically against the fence while easily sliding out...
Item #: 203680
Model #: D55168
Includes 15 gallon workshop compressor
5.0 SCFM at 90 PSI allows for quick compressor recovery times
15-gal. ASME steel tank is durable
Item #: 587569
Model #: GLL 150 ECK
360° full coverage horizontal leveling for all leveling applications
Fast self leveling system automatically levels the laser in seconds and indicates out-of-level condition
Compact and lightweight with single switch operation makes it easy-to-use and operate
Item #: 353244
Model #: GTS1031
Ultimate portability - balanced 1-handed carry handle combined with a compact design and complete under-table storage of accessories
Durable and unique all-steel base design - lightweight base incorporates carry handle and stacks on side for transport and storage; all-steel design...
Squarelock™ rip fence - engineered for maximum trueness; fence glides along the rail at a finger's touch or locks into place for solid and...
Item #: 526149
Model #: IWHT180-01
500 ft-lbs of max torque allows for fast tightening/removing of heavy-duty fasteners such as lag screws, concrete anchors, and lug nuts
6.7-lbs and 10-in in length provides a lightweight design with short head length for the least amount of user fatigue
Spring-load hammer and anvil deliver high amounts of torque with little torque reaction
Item #: 221857
Model #: DW734
Cuts per minute to 96 cuts per inch
3-knife cutter-head delivers 30% longer knife life
4-column carriage lock to reduce snipe
Item #: 1935
Model #: 11240
SDS-max® bit system for tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate
Combination dual mode selector — 2 modes of operation, rotary hammer and hammer only mode
Vario-Lock® positioning rotates and locks chisel into 12 different positions to optimize working angle
Item #: 23146
Model #: DCK440X
Includes XRP; ½-in hammer drill, 6-1/2-in circular saw, reciprocating saw, 18-volt pivoting head flashlight, 2 18-volt XRP; batteries, 1-hour...
18-volt XRP; cordless hammer drill features a patented 3-speed all-metal transmission and ½-in ratcheting chuck that delivers 420 units watts out of...
18-volt cordless reciprocating saw features a keyless blade clamp that allows for quick blade changes without touching blade or reciprocating shaft
Item #: 295340
Model #: 11247
Spline/round hex bit system for tool-free bit changes, with automatic bit locking
Vario-lock positioning rotates and locks chisel into 12 different positions to optimize working angle
360° auxiliary handle with built-in depth gauge provides wide range of movement along with consistent drilling depth
Item #: 526147
Model #: HTH181-01
Heavy-duty all-metal motor, impact hammer and anvil system is engineered to hold up in tough environments
Bosch advanced Electronic Cell Protection (ECP) is a unique battery pack design and customized electronics that delivers optimal battery life and...
Thin design nose piece allows the tool to get into tight spaces
Item #: 325140
Model #: 1530
Burr-free edges — no finishing
Full swivel die available — for cutting in all directions
Corrugated, trapezoidal or full square stock — all cut efficiently with a simple cutter change
Item #: 522712
Model #: CLPK221-181
Includes: Brute Tough™ hammer drill/driver, impact fastening driver, charger, 2 batteries, and carrying bag
Brute Tough™ 1/2-in hammer drill/driver, with its compact and lightweight design, delivers a superior balance and control even when working in...
Brute Tough 1/2-in hammer drill/driver delivers a 4-pole high performance motor for maximum power in the most compact size
Item #: 92775
Model #: DC628K
Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
Sequential-operating mode allows for precision placement and the bump-operating mode provides the user with production speed
Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches
Item #: 311295
Model #: DC490KA
Head swivels 360°, which allows user to access tight quarters while maintaining comfort
Cuts 7/32-in strip which continuously curls out of the cutting area providing consistent and accurate cuts
Cordless tool allows user to take the tool to the work piece
[null], doesn't currently have any inventory matching your selection. Try adjusting your filters or change your store. Keep in mind that if you change your store, other items in your cart may become unavailable.
We price our carpet in two ways:
- "Per Square Foot" is our unit price which measures the area of a flat surface, e.g., 3 ft. long x 3 ft. wide = 9 sq. ft.
- "Per Linear Foot" measures the length of a single roll of carpet, e.g., a linear foot of a 10 ft. wide roll of carpet = 1 ft. x 10 ft. = 10 sq. ft.