-
-
Item #: 117260
-
Model #: 30HDC140S
-
For use with a battery backup sump-pump system
-
Pumps up to 7-1/2 hours continuously on the Basement Watchdog A/C-D/C system (BWD12-120C), Basement Watchdog Special (BWSP), and Basement Watchdog...
-
Pumps up to 12 hours continuously on the Basement Watchdog Emergency system (BWE) and Basement Watchdog Combination sump-pump system (DFK961)
-
-
Item #: 197774
-
Model #: BWC1
-
Protective cage prevents debris or other wires from interfering with the movement of the floats.
-
Vented curved bottom prevents debris build-up under the float
-
Includes hose clamp to easily install at any level
-
-
Item #: 117266
-
Model #: 24EP6
-
Pumps 6 hours continuously on Basement Watchdog Emergency
-
Can pump intermittently for days
-
Accommodates the exclusive Basement Watchdog fluid sensor
-
-
Item #: 33216
-
Model #: PPWP6080
-
Driven into ground to water table
-
81 mesh screen
-
-
Item #: 346122
-
Model #: FSG2J24CP
-
The Square D by Schneider Electric Pressure Switch works with jet pumps, submersible pumps and reciprocating pumps. The 40 - 60 psi pressure switch...
-
Suitable for jet pumps, submersible pumps and reciprocating pumps
-
40 - 60 psi
-
-
Item #: 1649
-
Model #: UT305CB
-
Used in conjunction with 1 hp 230 v 3 wire submersible pumps sku 0313877 or 0313892 or 0022069, purchased separately.
-
Starts submersible well pump
-
Replaceable capacitors
-
-
Item #: 117272
-
Model #: BWD-HWA
-
Solid state circuitry is extremely sensitive and reliable
-
The Sensor has a 6-foot wire so it can be extended into a sump pit, or mounted on a wall and stretched to another location. (Accommodates the...
-
Loud 110dB alarm can be heard throughout the house
-
-
Item #: 313925
-
Model #: UT306CB
-
Used in conjuction with 1 1/2 hp 230 v 3 wire submersible pumps sku 0313880 or 0313892, purchased separately.
-
Starts submersible well pump
-
Replaceable capacitors
-
-
Item #: 25699
-
Model #: PPSPF-100
-
100 Mesh filter included.
-
Flush valve included.
-
Fits 1 In., 1 1/2 In. and 2 In. PVC pipe.
-
-
Item #: 144688
-
Model #: PPFSW
-
Replaces float switch on any sump or sewage pump 3/4 HP or less
-
13 amp rating; switch may not work with higher amp draw or older pumps
-
Plug pump into back of float switch and plug float into outlet
-
-
Item #: 43786
-
Model #: PPWP125-5-PL
-
Driven into ground to water table
-
Ideal for sandy ground
-
-
Item #: 154812
-
Model #: PP200G
-
200 Lb. rated.
-
1/4 In. lower connection.
-
Steel case.
-
-
Item #: 184210
-
Model #: PPSPC-200
-
Prevents backflow to sewage pump
-
Fits 2"diamater pipe
-
Flexible couplers for easy installation
-
-
Item #: 1647
-
Model #: UT303CB
-
Used in conjuction with 1/2 hp 230v 3 wire submersible pump sku 0313874, purchased separately.
-
Starts submersible well pump
-
Replaceable capacitors
-
-
Item #: 30190
-
Model #: PPWP3680
-
Driven into ground to water table
-
80 mesh screen
-
-
Item #: 64124
-
Model #: PP100G
-
Used with well system pumps
-
Steel construction
-
1/4" lower connection
-
-
Item #: 74036
-
Model #: PPS3050
-
30/50 preset.
-
Cap removes for easy adjustment.
-
Can be wired 115 or 230 volt.
-
-
Item #: 154779
-
Model #: PPWPF3680
-
Driven into ground to water table
-
82 mesh screen
-
-
Item #: 335616
-
Model #: RWD41/U
-
16 times more coverage than a spot detector
-
Effective - it has a loud alarm (80 decibels) and can detect the slightest amount of moisture
-
4 ft. leak detection cable
-
-
Item #: 182810
-
Model #: PPTC10-NL
-
10" length
-
Dual threaded, 1" MNPT, 3/4" FNPT
-
4 ports for accessories - two 1/4" ports (pressure gauge, pressure switch), two 1/2" ports (relief valve, drain valve)
-
-
Item #: 44388
-
Model #: PPWP200-4-PL
-
Driven into ground to water table
-
Ideal for sandy ground
-
-
Item #: 182142
-
Model #: PPTC13-NL
-
13" length
-
Dual threaded, 1-1/4" MNPT, 1" FNPT
-
4 ports for accessories - two 1/4" ports (pressure gauge, pressure switch), two 1/2" ports (relief valve, drain valve)
-
-
Item #: 137812
-
Model #: PPKV-1
-
Adjustable from 1-1/4" to 1-1/2" connection
-
Klunkless design for quiet stop of sump pump
-
Helps take the "Klunk" out of your pump stopping
-
-
Item #: 141964
-
Model #: PPSPC-150
-
Fits all sump pumps with 1-1/4" or 1-1/2" discharge pipe
-
Reversible couplers are easy to adjust
-
Required to help pump work properly
-
-
Item #: 182824
-
Model #: RWD80
-
8 ft. extension cable for Honeywell Water Defense Water Alarm (RWD41)
-
The entire cable detects water - adds 32 times more coverage than other leak detectors
-
Up to 240 feet of water sensing cable may be added to the alarm
-
-
Item #: 154967
-
Model #: PPS4060
-
40/60 presets.
-
Cap removes for easy adjustment.
-
Can be wired 115 or 230 volt.
-
-
Item #: 1648
-
Model #: UT304CB
-
Used in conjuction with 3/4 hp 230 v 3 wire submersible pumps sku 0313875 or 0313893, purchased separately.
-
Starts submersible well pump
-
Replaceable capacitors
-
-
Item #: 67595
-
Model #: FSG2J20CP
-
The Square D by Schneider Electric pressure switch works with jet pumps, submersible pumps and reciprocating pumps and the 20 - 40 psi pressure...
-
Suitable for jet pumps, submersible pumps and reciprocating pumps
-
20 - 40 psi
-
-
Item #: 144689
-
Model #: PPPRS-1
-
Replaces pedestal sump pump switches
-
Fits most pedestal pumps
-
Easy fix to a problem pedestal pump
-
-
Item #: 117269
-
Model #: Z-PACK
-
Required to activate Basement Watchdog standby batteries
-
Flexible pour spout makes filling the battery safe and easy
-
6 Quarts included
-
-
Item #: 73924
-
Model #: PPS2040
-
20/40 setting.
-
Cap removes for easy adjustments.
-
Can be wired both 115 or 230 volt.
-
-
Item #: 41832
-
Model #: PPWP125-4-PL
-
Driven into ground to water table
-
Ideal for sandy ground
We price our carpet in two ways:
- "Per Square Foot" is our unit price which measures the area of a flat surface, e.g., 3 ft. long x 3 ft. wide = 9 sq. ft.
- "Per Linear Foot" measures the length of a single roll of carpet, e.g., a linear foot of a 10 ft. wide roll of carpet = 1 ft. x 10 ft. = 10 sq. ft.