-
-
Item #: 305598
-
Model #: 57192
-
Used to connect 3/4" or 1" PVC pipe to an Orbit manifold system
-
No special tools required
-
For use with Orbit's manifold systems model number 57250 and 57263
-
-
Item #: 160683
-
Model #: 061050
-
Our hose and tubing are the manifold/supply line and feeder lines to any low-flow and drip-watering device, it is important that superior quality...
-
Use as supply line and feeder line to any low-flow and drip-watering device
-
Can be buried or left out on the surface in any weather
-
-
Item #: 320751
-
Model #: MLA-TOOL
-
Ergonomically designed to make snapping a hole into the 1/2" poly tubing even easier
-
Has side guides to slide over the 1/2" tubing to help hold into place and also act as a safety shield to the sharp hole punch tip
-
Has 1/4" side slot to securely hold the barb ends of 1/4" fittings while pushing 1/4" vinyl onto it's other barbed end
-
-
Item #: 306401
-
Model #: 67750
-
Prevents outside water from siphoning through and outside faucet
-
Fits all standard outdoor hose faucets
-
Female hose thread inlet x male hose thread outlet
-
-
Item #: 106327
-
Model #: 117025B
-
Designed for use on level ground and shorter circuits
-
Insert directly between 2 sections of 1/4" tubing anywhere you need them
-
-
Item #: 306968
-
Model #: 66190
-
Ideal for watering hanging baskets and container plants
-
Flexible memory tube, allows precise nozzle placement
-
Flow adjustment from 0.5 to 8 GPH at 25 PSI
-
-
Item #: 306438
-
Model #: 67205L
-
Use for spot watering trees and shrubs
-
Pressure compensation delivers a consistent 1 GPH water flow regardless of water pressure
-
-
Item #: 306415
-
Model #: 67330
-
Ideal for watering vegetables and closely spaced plants
-
Waters 0.25 GPH every 5' at 25 PSI
-
For outdoor use and cold water only
-
-
Item #: 126032
-
Model #: CNV182EMT
-
Conserve water and save money by watering your plants directly with drip irrigation
-
Stop wasteful overspray and enjoy healthier plants while using less water
-
-
Item #: 88289
-
Model #: MLA-58
-
Use this 50 PSI pressure regulator when installing micro-sprinklers and misters with a faucet water pressure greater than 50 PSI
-
Helps prevent blow outs of connectors and fittings
-
Has 3/4" female hose thread inlet and a 3/4" male hose thread outlet
-
-
Item #: 208018
-
Model #: L530DP
-
Includes anti-syphon and PC drippers for all types of landscape, perennial, and garden areas
-
Waters up to 10 trees and hedges, plus 30 plants or 20 shrubs and vines
-
-
Item #: 306441
-
Model #: 67206L
-
Use for spot watering trees and shrubs
-
Pressure compensation delivers a consistent 2 GPH water flow regardless of water pressure
-
-
Item #: 208028
-
Model #: 052020P
-
Our hose and tubing are the manifold/supply line and feeder lines to any low-flow and drip-watering device, it is important that superior quality...
-
Use as supply line and feeder line to any low flow and drip watering device
-
Can be buried or left out on the surface in any weather
-
-
Item #: 44210
-
Model #: MLM-404
-
These patented 3-in-1 micro-sprays gives you 3 choices of spray patterns including a 360° flat fan spray , a 165° and a 180° half circle spray pattern
-
This 3-in-1 micro-spray is ideal for watering small areas, atriums, shrubs, small trees, plants, flowers, shrubs, and trees along walkways, fences,...
-
Easy to interchange the spray patterns by sliding off the patented swap top reversing it then sliding it back onto the G shaped micro-spray mister
-
-
Item #: 306417
-
Model #: 67321
-
Ideal for watering vegetables and closely spaced plants
-
Holes spaced every 6" - waters 0.9 GPH every 1' at 25 PSI
-
A single 1/4" soaker line should not exceed 15'
-
-
Item #: 191772
-
Model #: MLT-TEE
-
Use these 1/4" tees to run the 1/4" vinyl tubing and the 1/4" in-line drip tubing in opposing directions
-
Great for running a line of 1/4" vinyl along a row of potted plants to feed a piece of 1/4" vinyl to a dripper in each pot
-
Use our all-in-one tool MLA-tool to make installation of these 1/4" tees even easier
-
-
Item #: 306967
-
Model #: 65140
-
Ideal for watering flower beds
-
Adjustable spray distance - 5' to 10'
-
Contains 5 snap-on nozzles each - full, 1/2 and quarter
-
-
Item #: 384024
-
Model #: 67758
-
Ideal for installing a drip irrigation system
-
Cuts plastic pipe up to 1-1/4" in diameter
-
Sharp, heat-treated, steel, replaceable blade
-
-
Item #: 44221
-
Model #: MLD-PC1
-
These 1 GPH drippers are pressure compensated to keep a constant flow of 1 GPH at various water pressures up to 25 PSI
-
A 25 PSI pressure regulator MLA-25 PR and a filter MLFF-41 are highly recommended to be used first at the water source when using these 1 GPH drippers
-
Use this dripper to slowly water a potted plant or landscapes using only 1 GPH of water and they are ergonomically designed with a wide-winged top to...
-
-
Item #: 208105
-
Model #: R605DT
-
Handles up to 720 GPH through 150 mesh stainless-steel or poly-screen element
-
Includes hose/pipe thread swivel coupling
-
-
Item #: 160749
-
Model #: 299005B
-
Simply slide 1 side of end clamp over hose, bend hose and slide clamp over the bent end of hose
-
Made from ABS, for use with water pressure up to 60 PSI
-
-
Item #: 192409
-
Model #: S5600UB
-
Use to connect 2 sections of 1/2" - .710" hose in order to extend or repair your system
-
Tees, elbows, end-plugs and adaptors also available
-
-
Item #: 208114
-
Model #: R397CB
-
8" wire hook stakes are pre-bent to hold lines in place easily
-
Designed to keep low-flow watering lines securely in place where you want them
-
Made in the USA of quality materials for optimum performance
-
-
Item #: 340651
-
Model #: SDKTHP
-
Use for a quick set-up for any drip irrigation installation complete with timer and filter/regulator
-
Includes timer, extension hose, filter/regulator combination, dual shut-off "Y" connector, easy installation and watering guide
-
Attaches to any outdoor faucet while still maintaining existing connections
-
-
Item #: 305770
-
Model #: 67401
-
For use with 1/4" distribution or soaker tubing
-
Double barb design adds additional holding power
-
Works with all brands of 1/4" drip tubing
-
-
Item #: 15816
-
Model #: MLD-QDT100
-
This brown 1/4" in-line drip tubing has a 1/2 GPH dripper molded into the 1/4" tubing every 12 "
-
Use our 1/2" poly tubing or our 1/4" vinyl tubing as a lead in water supply to this 1/4" in-line drip tubing
-
With 25 PSI of water pressure you can run up to 12 individual 33' lengths of this 1/4" in-line drip tubing from the 1/2" poly tubing
-
-
Item #: 306427
-
Model #: 67462
-
Use to close the end of 1/2" distribution tubing
-
Removable end-cap for winterizing or system flushing
-
Works with the most common sizes of 1/2" drip tubing (.690, .700 and .710 O.D.)
-
-
Item #: 191773
-
Model #: MLD-AAD
-
These .5 GPH drippers are in line drippers that drip in the center so they can be added together using 1/4" vinyl tubing to make a line of drip
-
Use these .5 GPH add-a-drippers to slowly and gently water window boxes of flowers, rows of vegetables and potted plants
-
These drippers can be added together every 12" on a single line of 1/4" vinyl up to 30' from the 1/2" poly tubing
-
-
Item #: 45240
-
Model #: L336STUB
-
Converts sprinkler risers to two 1/4" drip lines
-
Inlet: 1/2" FPT, outlet: 1/4" barbed tee
-
Screw onto an existing sprinkler riser pipe and attach 1/4" tubing to convert to drip irrigation
-
-
Item #: 306964
-
Model #: 65451
-
Use for connecting 1/2" distribution tubing
-
Works with the most common sizes of 1/2" drip tubing (.690, .700 and .710 O.D.)
-
Unique release feature simplifies installation and maintenance
-
-
Item #: 41621
-
Model #: SDFSTHP
-
Tool free installation
-
Everything you need to install a drip watering system with an easy "1-2-3" process
-
-
Item #: 88275
-
Model #: MLA-51G
-
Use these 16 goof plugs to seal up any holes made by mistake using either of our punch tools
-
The goof plugs will seal the holes where a 1/4" barbed coupler, adapter, dripper, or flow controller was removed
-
Ergonomically designed to make installations easier and can also be installed using the end of the all in 1 tool MLA-tool
We price our carpet in two ways:
- "Per Square Foot" is our unit price which measures the area of a flat surface, e.g., 3 ft. long x 3 ft. wide = 9 sq. ft.
- "Per Linear Foot" measures the length of a single roll of carpet, e.g., a linear foot of a 10 ft. wide roll of carpet = 1 ft. x 10 ft. = 10 sq. ft.