ZIP code to see price.
Item #: 576796
Model #: GLL 3-50
1 horizontal, 2 vertical lines plus plumb down point - for level, align, plumb, and square applications
360° rotational mounting base with manual fine adjustment for 1 time setup and convenient viewing of laser point on the floor
Pulse laser receiver mode for use with optional LR2 laser receiver at up to 165-ft and in bright light conditions
Item #: 526148
Model #: HTH182-01
Heavy-duty all-metal motor, impact hammer and anvil system is engineered to hold up in tough environments
Bosch advanced Electronic Cell Protection (ECP) is a unique battery pack design and customized electronics that delivers optimal battery life and...
Thin design nose piece allows the tool to get into tight spaces
Item #: 488034
Model #: FNH180KL-16
Bosch Click & Go Storage Solutions allows you to easily improve productivity by reducing time spent searching for your tools so you can get back on...
Compact design with narrow housing allows user to operate the nailer in tight areas
Blank fire lock-out avoids damage to work piece by preventing blank firing when nail magazine is empty
Item #: 595094
Model #: VAC090S
Semi-automatic filter cleaning - cleans filter on demand through remote activation button
L-Boxx integration - instantly creates a mobile workstation
Power tool activation - allows power tool's switch to turn vacuum on and off
Item #: 412232
Model #: 1773AK
Lock-on slide switch for extended-use applications
Double insulated, UL listed, complies to OSHA
Constant Response™ circuitry provides soft-start, maintains constant speed under load, provides overload protection
Item #: 557373
Model #: CM10GD
Axial-Glide™ system: durable precision – consistent precision over tool life; compact workspace – saves up to 10-in in workspace;...
Expanded cutting capacity: 12-in horizontal capacity (nominal); 5-1/2-in vertical capacity against the fence (base); 6-in crown capacity against the...
Upfront bevel controls - all-metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the...
Item #: 410442
Model #: 4310
Up-front bevel lock lever and range selector knob easily-accessed controls for quick and accurate bevel settings
15 amp motor, 4,800 RPM
Crown miter detents: 31.6° miter and 33.9° bevel detents for quick, accurate crown cuts
Item #: 294100
Model #: 4100-09
Includes saw, wheeled stand, 10-in blade, SquareLock™ rip fence, miter gauge and push stick
Motor generates 3,650-RPM to easily rip through woods
10-in carbide-tipped blade is durable
Item #: 9483
Model #: 5312
Upfront bevel lock lever and range selector knob - easily accessed controls for quick and accurate bevel settings
Tall 4-1/2" speed-track sliding fences - for easy bevel set-ups and increased crown molding cutting capacities
Two sliding base extensions for 40" total length
Item #: 139458
Model #: 11264EVS
SDS-max® bit system for tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate
Active Vibration Control™ with vibration reduction in the hammer mechanism and the grip area provides maximum user comfort for extended periods...
One-hand SDS-max® system makes changing bits easier than ever before while maximizing jobsite productivity
Item #: 557379
Model #: CM8S
Ultimate portability – Bosch exclusive design delivers a well-balanced saw with a top carry handle, and a weight of only 37 lbs easily provides...
Easy access bevel lock lever and bevel turret stops are located on side of tool
Integrated expanding base extensions expand up to 29-in left to right for additional work-piece support
Item #: 412188
Model #: 3931B-SPB
Bosch exclusive Pulse-Clean™ electromagnetic filter cleaning system - shakes the dual filter cartridges to remove dust and maintain maximum...
Fine dust filtration capabilities - captures 99.93% particles of 3.0 microns and larger in diameter
Item #: 525942
Model #: RHH181-01
Includes: rotary hammer, two 18-volt Li-ion batteries, charger, side handle and hard carrying case
0-1,400 RPM; 0-4,550 BPM; 1.25 impact energy
Electronic Cell Protection (ECP) provides extended battery life by preventing overheating in tough applications
Item #: 410430
Model #: 4405
Up-front controls exclusive feature provides easy and efficient access to miter and bevel angle settings
Dual workpiece supports extend material support from 21" (53.3 cm) to 36" (91.4 cm)
Exclusive wedge-and-slot miter detent system provides consistent and precise miter angles over the life of the tool
Item #: 625307
Model #: DH507
Comfortable ergonomic grip area on the hammer tube - for added comfort (in addition to the side handle) when chiseling in tight spaces or in a...
Variable-speed trigger and variable-speed dial for controlled chiseling applications
Vario-Lock rotates and locks chisel in 12 different positions to optimize the working angle
Item #: 522733
Model #: CLPK432-181
Includes: Compact Tough hammer drill/driver, reciprocating saw, impact fastening driver, 18-volt Li-ion flashlight, charger, 2 FatPack batteries, and...
Compact Tough hammer drill/driver features a 4-pole open frame motor for more power in a smaller size
Compact Tough hammer drill/driver offers an ergonomic design for outstanding comfort, a Durashield housing to withstand tough conditions, and a soft...
[null], doesn't currently have any inventory matching your selection. Try adjusting your filters or change your store. Keep in mind that if you change your store, other items in your cart may become unavailable.
We price our carpet in two ways:
- "Per Square Foot" is our unit price which measures the area of a flat surface, e.g., 3 ft. long x 3 ft. wide = 9 sq. ft.
- "Per Linear Foot" measures the length of a single roll of carpet, e.g., a linear foot of a 10 ft. wide roll of carpet = 1 ft. x 10 ft. = 10 sq. ft.