-
-
Item #: 72811
-
Model #: A52BE12U
-
Meets specifications UL 651 and NEMA TC 2
-
Rated for 90 cable
-
Sunlight-resistant
-
-
Item #: 187524
-
Model #: A53BE12
-
Meets specifications UL 651 and NEMA TC 2
-
Rated for 90 cable
-
Sunlight-resistant
-
-
Item #: 115973
-
Model #: L5142223L
-
A bushing designed to fit into a bell end or female fitting to reduce from 1 diameter to the next smaller conduit diameter
-
Male and female elements of the bushing are solvent weld
-
UL listed.
-
-
Item #: 49111
-
Model #: L5133719L
-
Adapter used with the hub inside a box or enclosure
-
The cylinder protrudes through a hole in the box wall and is solvent welded to a female fitting outside the box or enclosure
-
UL Listed
-
-
Item #: 73013
-
Model #: L5133695L
-
Typically installed on vertical conduit, usually outdoors, to receive open wires from an electrical service line sometimes called a mast head, it...
-
Safe. non-conductive. won't corrode or rust
-
Made from durable PVC
-
-
Item #: 155877
-
Model #: L5121057
-
A section of PVC Schedule 80 conduit which has been heated and bent to effect a 90° change in direction in a conduit run
-
Both ends are spigot (plain) end and solvent weld
-
Can be used above ground or buried and are suitable for concrete encasement
-
-
Item #: 11885
-
Model #: A53BC12U
-
Meets specifications UL 651 and NEMA TC 2
-
Rated for 90 cable
-
Sunlight-resistant
-
-
Item #: 50610
-
Model #: L5133718L
-
Adapter used with the hub inside a box or enclosure
-
The cylinder protrudes through a hole in the box wall and is solvent welded to a female fitting outside the box or enclosure
-
Can also be used to connect PVC conduit to a box or other threaded body with the use of a lock nut
-
-
Item #: 72307
-
Model #: L5133742L
-
Installed on a vertical conduit, usually outdoors, to receive open wires from an electrical service line
-
Sometimes called a weather head, it prevents rainwater from entering the conduit
-
Made from rigid, durable PVC, UV resistant
-
-
Item #: 4032
-
Model #: L5140034L
-
Cap to fit 1 1/4" conduit
-
Dome top
-
UL listed
-
-
Item #: 214186
-
Model #: L5121056
-
A section of PVC Schedule 80 conduit which has been heated and bent to effect a 90° change in direction in a conduit run
-
Both ends are spigot (plain) end and solvent weld.
-
Product can be used above ground or buried and is suitable for concrete encasement
-
-
Item #: 72770
-
Model #: A52BA12U
-
Meets specifications UL 651 and NEMA TC 2
-
Rated for 90 cable
-
Sunlight-resistant
-
-
Item #: 83093
-
Model #: A53BA12
-
Meets specifications UL 651 and NEMA TC 2
-
Rated for 90 cable
-
Sunlight-resistant
-
-
Item #: 115863
-
Model #: L5133365L
-
Used for conduit termination box, wire splices and 2 single-gang electrical devices
-
Exposed outlet box
-
Uses single-gang electrical device cover
-
-
Item #: 50368
-
Model #: L5133717L
-
Adapter used with the hub inside a box or enclosure
-
The cylinder protrudes through a hole in the box wall and is solvent welded to a female fitting outside the box or enclosure
-
Can also be used to connect PVC conduit to a box or other threaded body with the use of a lock nut
-
-
Item #: 145138
-
Model #: L5133652L
-
UL listed. CSA listed
-
Easy installation, easy access for wire pulling or maintenance
-
Rigid and durable PVC, won't oxidize or corrode
-
-
Item #: 115993
-
Model #: L5133565L
-
Removable cover
-
Conduit body contains 3 conduit hubs, 1 in each end and 1 in the middle at a 90° angle
-
UL listed
-
-
Item #: 145137
-
Model #: L5133662L
-
Easy installation, removable cover provides easy access for wire pulling and maintenance
-
Gasketed
-
Hubs are not threaded
-
-
Item #: 145079
-
Model #: L5133465L
-
Used for straight line conduit runs and splices and uses single gang electrical device cover
-
Single gang surface mounted electrical box which contains one conduit entrance hub in each of the two short walls of the box
-
Easy installation
-
-
Item #: 145136
-
Model #: L5133372L
-
Easy installation
-
Conforms to NEMA TC-3
-
Conforms to UL 514
-
-
Item #: 145105
-
Model #: L5133382L
-
Weatherproof outdoor 2 gang box
-
Used for conduit termination or single gang electrical devices
-
Uses single gang device covers
-
-
Item #: 145140
-
Model #: L5142230L
-
A bushing designed to fit into a bell end or female fitting to reduce from 1 diameter to the next smaller conduit diameter
-
Male and female elements of the bushing are solvent weld
-
UL listed
-
-
Item #: 214180
-
Model #: L5121055
-
A section of PVC Schedule 80 conduit which has been heated and bent to effect a 90° change in direction in a conduit run
-
Both ends are spigot (plain) end and solvent weld
-
Can be used above ground or buried and are suitable for concrete encasement
-
-
Item #: 80676
-
Model #: A53AE12
-
Meets specifications UL 651 and NEMA TC 2
-
Rated for 90 cable
-
Sunlight-resistant
-
-
Item #: 204390
-
Model #: A52AE51U
-
Meets specifications UL 651 and NEMA TC 2
-
Rated for 90 cable
-
Sunlight-resistant
-
-
Item #: 72855
-
Model #: L5133715L
-
The cylinder protrudes through a hole in the box wall and is solvent welded to a female fitting outside the box or enclosure
-
Easy installation
-
UL listed
-
-
Item #: 145068
-
Model #: L5144544L
-
For damp and wet locations with approved cover
-
Easy installation
-
UL listed
-
-
Item #: 115839
-
Model #: L5133101
-
Gasketed against moisture, removable cover provides easy access for wire pulling and maintenance
-
Easy installation
-
Hubs are not threaded
-
-
Item #: 115964
-
Model #: L5233763
-
A section of PVC Schedule 40 conduit which has been heated and bent to effect a 45° change in direction in a conduit run
-
A standard conduit bell is formed on 1 end while the other end is a spigot (plain) end - both ends are solvent weld
-
Product can be used above ground or buried and is suitable for concrete encasement
-
-
Item #: 160053
-
Model #: L5121053
-
A section of PVC Schedule 80 conduit which has been heated and bent to effect a 90° change in direction in a conduit run
-
Both ends are spigot (plain) end and solvent weld.
-
Product can be used above ground or buried and is suitable for concrete encasement
-
-
Item #: 72818
-
Model #: A52CE12
-
Meets specifications UL 651 and NEMA TC 2
-
Rated for 90 cable
-
Sunlight-resistant
-
-
Item #: 73414
-
Model #: A53CE12
-
Meets specifications UL 651 and NEMA TC 2
-
Rated for 90 cable
-
Sunlight-resistant
We price our carpet in two ways:
- "Per Square Foot" is our unit price which measures the area of a flat surface, e.g., 3 ft. long x 3 ft. wide = 9 sq. ft.
- "Per Linear Foot" measures the length of a single roll of carpet, e.g., a linear foot of a 10 ft. wide roll of carpet = 1 ft. x 10 ft. = 10 sq. ft.