ZIP code to see price.
Item #: 355464
Model #: DW3599LT
Tougher tungsten carbide stays sharper longer
Specially formulated anti-stick coating minimizes friction and gum-up for smoother cuts
Thin kerf for fast and smooth cutting action
Item #: 673729
Model #: DWS709
Includes: miter saw, carbide blade, blade wrench, dust bag, and material clamp
Powerful 15-amp, 3,800 RPM motor delivers extended power and durability
Tall sliding fences support crown molding up to 5-1/2-in nested and base molding up to 4-1/2-in vertically against the fence while easily sliding...
Item #: 557394
Model #: DCK420D2
Includes: DCD780 1/2-in drill/driver, DCF885 1/4-in impact driver, DCS381 reciprocating saw, DCL040 LED work light, two 20-volt max Li-ion 2.0 Ah...
DCD780 20-volt max 1/2-in drill/driver features 2-speed transmission (0-600/0-2000 RPM)
DCS381 20-volt max reciprocating saw, with keyless blade clamp, allows for quick blade change without touching blade or reciprocating shaft
Item #: 234603
Model #: DCK281D2
DEWALT brushless motor delivers up to 57% more run time over brushed
XR Li-ion batteries with fuel gauge provide 33% more capacity over standard packs
DCD790 20-volt max 1/2-in drill/driver compact (7.2-in front to back), lightweight (3.5-lbs) design fits into tight areas
Item #: 548702
Model #: DWA8029D
Combinatioin of aluminum oxide and silicon carbide grain
Designed for metal and concrete/masonry cutting
Item #: 9555
Model #: DCS391M1
Includes DCS391 6-1/2-in circular saw, DCB204 20-volt max XR premium Li-ion battery (4-Ah), fast charger, 6-1/2-in carbide-tipped blade, and kit box
Powerful 460 MWO (maximum watt output), 3,700 RPM motor delivers power and speed to make the most demanding cuts with ease
High-strength and lightweight magnesium shoe provides jobsite durability for long-term cut accuracy
Item #: 499301
Model #: DCK255X
Includes 18-volt XRP; 1/2-in hammer drill, 18-volt 1/4-in impact driver, 2 18-volt XRP; batteries, 1-hour charger, 360° side handle and contractor bag
18-volt XRP; cordless hammer drill with patented 3-speed all-metal transmission and 1/2-in metal ratcheting chuck with carbide inserts delivers 450...
18-volt impact driver delivers 1,330 in-lbs of torque and 0-2,400 RPMs offering power and speed to perform a wide range of fastening applications...
Item #: 551618
Model #: DCK296M2
Includes: DCD995 1/2-in hammerdrill, DCF886 1/4-in impact driver, (2) 20-volt max XR high capacity Li-ion batteries (4.0Ah), fast charger, (2) belt...
DCD995 20-volt max 1/2-in hammerdrill has a 3-speed, high-performance (0-2,000 RPM) all-metal transmission optimizes tool-to-task for fast...
DCD995 20-volt max 1/2-in hammer drill has 0-34,000 BPM for fast drilling in masonry materials
Item #: 254118
Model #: DCD980M2
Includes two 20-volt XR premium lithium-ion batteries, charger, drill, 360° side handle and hard kit box
Patented 3-speed transmission (0-2,000-RPM) delivers up to 535 UWO of power
Heavy-duty 1/2-in metal ratcheting chuck with carbide inserts provides superior bit grip strength
Item #: 546055
Model #: DCD995M2
Includes two 20-volt MAX XR lithium-ion batteries, charger, hammer drill, belt hook, on-board bit holder, 360° side handle and hard case
High-power, 3-speed motor delivers 0-7,650/22,100/34,000-BPM
Variable-speed reversible transmission (0-450/1,300/2,000-RPM) provides reliable control and high-performance brushless motor delivers 650 UWO of...
Item #: 162053
Model #: DC608B
Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
Straight magazine, accepts 18 gauge nails ranging in lengths from 5/8-in to 2-in
Item #: 598691
Model #: DCGG571M1
Powerful motor delivers 10000 max PSI to power through clogged grease fittings
High-volume pump pushes up to 5-oz-min high-flow applications
Up to 16 cartridges per charge with a single DEWALT 20-volt max battery (4.0 Ah)
Item #: 226742
Model #: DW618PKB
2-1/4 HP (maximum motor HP), 12.0 Amp electronic variable speed motor provides the power to rout smoothly through the toughest hardwoods
Electronic variable speed with full feedback control for constant speed under load from 8,000-24,000 rpm and soft start to reduce start-up torque...
Micro-fine depth adjustment ring provides precise depth adjustments in 1/64-in increments and adjusts vertically for a constant switch/cordset...
Item #: 525606
Model #: DCF889HM2
Includes: impact wrench, fast charger, two 20-volt max XR premium Li-ion batteries, and kit bag
Hog ring anvil for quick and easy socket changes
400 ft-lbs of maximum torque to perform a wide range of heavy-duty fastening applications
Item #: 580695
Model #: DWA2TX25IR5
Impact ready bits with FlexTorq have increased durability for long life
CNC machined resulting in accurate manufacturing for optimal fit into screw recess
Item #: 546089
Model #: DCF895D2
Includes two 20-volt max XR™ compact lithium-ion batteries, fast charger, impact driver, belt hook, kit box with accessory storage
Brushless motor delivers 0-1,300/2,400/3,300-BPM
3 speeds (0-950/1,900/2,850-RPM) for better control in specific applications, and 500/900/1,500-in-lbs of max torque
[null], doesn't currently have any inventory matching your selection. Try adjusting your filters or change your store. Keep in mind that if you change your store, other items in your cart may become unavailable.
We price our carpet in two ways:
- "Per Square Foot" is our unit price which measures the area of a flat surface, e.g., 3 ft. long x 3 ft. wide = 9 sq. ft.
- "Per Linear Foot" measures the length of a single roll of carpet, e.g., a linear foot of a 10 ft. wide roll of carpet = 1 ft. x 10 ft. = 10 sq. ft.