Lowe's Home Improvement

Lattice Photo Display

Brought to you by Lowe's Creative Ideas

Turn small photographs into a custom collage you can update in an instant.

Photos attached to clips on lattice

Project Overview

Skill Level


Estimated Time

1 day

Estimated Cost


Tools & Materials


  • Jigsaw with a fine-tooth blade
  • 120-grit sandpaper
  • Super glue
  • Wood glue (optional)


  • 2-ft x 8-ft spruce lattice, #429249
  • 2 - nickel clip rings, packs of 10, #333938
  • Valspar signature paint, Encounter, #4008-7B
  • 1-1/2-in wire brads (optional)

Items may be Special Order in some stores. Product costs, availability, and item numbers may vary online or by market. Paint colors may vary slightly from those shown. Availability varies by market for lumber species and sizes.

Missing anything? Shop Online


Step 1

Mark and cut the lattice to size (24-in x 30-in shown) using a jigsaw. Use wood glue to reattach any loose pieces and sand any rough edges.

Step 2

Apply two coats of paint to both sides of the lattice.

Step 3

Slip off the wire hanger from each clip. Dab super glue to the back of a clip and hold it in position until the glue dries. Repeat for the remaining clips -- we used 15 altogether.

Good to Know

Plan the clip placement around the sizes of your photos. For large photos, space clips at every other intersection of the lattice strips.

Step 4

Lattice photo display

If the display will be mounted on a wall, hold it in position and mark the top corners of two openings on opposite sides of the lattice. Drive wire brads at the marks and hang the display.