Lowe's Home Improvement
FREE PARCEL SHIPPING on Qualifying Orders

Instant Sawhorse Desk

Brought to you by Lowe's Creative Ideas

Set up this desk in minutes, or use the arrangement as a temporary table or buffet.

Desk made from a door on sawhorses

Project Overview

Skill Level

Beginner

Estimated Time

A few hours

Estimated Cost

$$$$$

Tools & Materials

Tools

  • Painting supplies (optional)

Materials

  • 2 - folding steel sawhorses, #77883
  • 32-in x 80-in hollow-core lauan door, #10705

Items may be Special Order in some stores. Product costs, availability, and item numbers may vary online or by market. Paint colors may vary slightly from those shown. Availability varies by market for lumber species and sizes.

Missing anything? Shop Online

Instructions

Step 1

Apply an optional clear finish or paint to the door and let dry. Any finish will make the surface easier to keep clean than bare wood.

Step 2

Set up the sawhorses parallel to each other with the tops spaced about 60 inches apart.

Good to Know

To help set up the sawhorses parallel to each other, lay the door on the floor next to and parallel with where you’ll set up the desk. Then position the sawhorses using the door edge as a guide.

Step 3

Desk made from a door on two sawhorses

Rest the door centered on the sawhorses.

Step 4

If you have a problem with the door sliding out of position, glue and clamp pairs of 3/4-inch square dowels cut 30 inches long to the underside of the door on either side of the sawhorse tops -- the dowels should be spaced about 4 inches apart.