- Ideas & How-Tos
Choose Your Savings
Display your favorite photos in easy-to-make photo frames. Use plywood and clear acrylic sheets to make each floating photo frame. Make these DIY frames in a variety of sizes.
Items may be Special Order in some stores. Product costs, availability, and item numbers may vary online or by market. Paint colors may vary slightly from those shown. Availability varies by market for lumber species and sizes.
Missing anything? Shop Online
Have a Lowe's associate cut the plywood and acrylic sheet into 2' x 2' squares.
Stack two squares of acrylic on one square of plywood and clamp together.
Measure 1-1/4" from each corner and slowly drill a 5/16" hole through the acrylic and plywood.
If you have a drill press, using a clamp-on fence and a stop block will make this quick and easy.
Sand the plywood faces and edges with 100-grit sandpaper. Wipe off dust with a cloth.
Cut a 10"-long piece from the whitewood board to use as center support. This will keep the acrylic squares from sagging in the center of the frame.
Glue the end of the support to the middle of the plywood's front side. (The artwork will hide the support.) Weigh down the support while the glue dries to ensure a good bond.
Mount a large D-ring hanger to the back of the plywood with a screw.
Center and tape your photo or artwork to one acrylic square. Top with the second acrylic square. Then connect the acrylic and plywood pieces using the hex-head bolts, steel spacers, and lock nuts.