Prices, promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.
4 spools of 1/16-in x 200-ft twisted polypropylene in different colors, #349239
Items may be Special Order in some stores. Product costs, availability, and item numbers may vary online or by market. Paint colors may vary slightly from those shown. Availability varies by market for lumber species and sizes.
Remove the side disks from the core of an empty ribbon spool. Then cut lengths of twine about 2 feet long. (You don't need to wrap all of it.)
Good to Know
You can also use a compass to draw and cut cardboard disks any size you like. Leave a hole with at least 1/2-inch in diameter at the center.
Choose your first twine color, pull one end through the hole in the disk, and tie a loop snugly around the disk. Wrap twine around the disk and work your way around the outside edge until you cover the disk.
When you're ready to change colors, tie the next color twine to the previous one with the knot on the back face and continue wrapping. Repeat with the remaining colors and knot the final strand to hold it in place.
Good to Know
Wrap the twine snug against the disk, but not so tight that it bends the disk. Flatten the disk as needed while you work.
Cut a piece of colored twine about twice as long as the width of the disk, loop it through the center of the ornament, and tie the ends to create a hanger for the ornament.
You May Also Like...
Go Ahead & Brag!
Have you recently completed a DIY project or room makeover? Share it with us.